Eco Systems Group is a PAS 2030 certified installer of insulation, solar PV, heat pumps and heating measures, working to PAS 2035 for housing associations, councils and main contractors. Since 2012 we have installed over 15,000 measures, including work in around 2,000 social housing homes across London, the South East and the East of England.
Discuss a programmePAS 2030 is the national specification for installing energy efficiency measures in existing homes. It covers how each measure is installed, commissioned and handed over, and installers are audited against it by an independent certification body. Publicly funded retrofit, including the Warm Homes: Social Housing Fund, requires measures to be fitted by PAS 2030 certified, TrustMark registered installers.
The two standards work together. PAS 2035 governs the whole retrofit project; PAS 2030 governs the installation within it. The current editions are PAS 2035:2023 and PAS 2030:2023.
| PAS 2035 | PAS 2030 | |
|---|---|---|
| What it covers | The whole-house retrofit process: assessment, design, coordination and evaluation | The installation, commissioning and handover of each measure |
| Who it applies to | Retrofit Assessors, Retrofit Coordinators and Retrofit Designers | The installer fitting the measures |
| What it produces | An assessment and improvement plan for each home, and a project lodged with TrustMark | Compliant installations with the evidence, certificates and guarantees to prove it |
| Our role | We work to it on every funded project, and offer retrofit assessment and coordination | We hold certification for every measure listed below |
Our certification is held through four certification bodies, each covering different measures. Solar PV, battery storage and heat pumps are installed under MCS. Certificates are available for prequalification on request.
| Measure | Certification body | Licence |
|---|---|---|
| Cavity wall, internal wall and room-in-roof insulation; air source heat pumps (MCS) | Installation Assurance Authority (IAA, formerly CIGA) | 1911003 |
| External wall, loft, flat roof, pitched roof and floor insulation; energy-efficient glazing and doors | British Board of Agrément (BBA) | 1973418 |
| Solar PV and battery storage (MCS) | NICEIC | NIC13599 |
| Heating and hot water controls, electric storage heaters and energy-efficient lighting | Simply Certification | SICI22841 |
See the full list, including TrustMark, Constructionline Gold and SafeContractor, on our accreditations page.
Whether we are appointed directly or working in a main contractor's supply chain, every home follows the same steps.
Around half of our work is social housing retrofit, the rest is for private homeowners and businesses.
We deliver single measures and multi-measure programmes directly for landlords, including work funded through the Warm Homes: Social Housing Fund and Warm Homes: Local Grant.
We work as a PAS 2030 certified delivery partner in Tier 1 contractors' supply chains, taking on the measures we specialise in and supplying the evidence your coordinator needs for lodgement.
Our in-house retrofit assessors and coordinators, supported by accredited partners, can take a home from first assessment to final lodgement.
A PAS 2030 certified installer is a company that has been independently audited against PAS 2030, the national specification for installing energy efficiency measures in existing homes. Certification is granted measure by measure, so an installer is only certified for the measures listed on its certificates.
PAS 2035 sets out how a whole retrofit project is assessed, designed, coordinated and evaluated. PAS 2030 sets out how each measure within that project is installed, commissioned and handed over. A funded retrofit project needs both: PAS 2035 roles to manage it and a PAS 2030 certified installer to fit the measures.
Yes. Energy efficiency measures must be installed by PAS 2030 certified, TrustMark registered installers under PAS 2035, and solar PV, batteries and heat pumps must be installed by MCS-certified installers. We meet all of these requirements.
Cavity wall, external wall, internal wall, loft, room-in-roof, flat roof, pitched roof and floor insulation, energy-efficient glazing and doors, heating and hot water controls, electric storage heaters and energy-efficient lighting. Solar PV, battery storage and air source heat pumps are installed under our MCS certification.
Yes. We work as a specialist subcontractor within Tier 1 contractors' supply chains, and directly for housing associations and councils.
Yes. Email info@ecosystemsgroup.co.uk for our PAS 2030, MCS, TrustMark and insurance certificates, company policies and capability pack. We are Constructionline Gold and SafeContractor accredited.
No. Warm Homes funding is applied for by housing associations and councils, not by individual homeowners, and we do not offer funded installations to homeowners. Homeowners can ask us for a free survey and quote for privately paid work.
Our social housing and public sector clients include Hackney Council, ISHA, VIVID, the Ministry of Defence, Peabody, Notting Hill Genesis, East Suffolk Council, Runnymede Borough Council, St Mungo's, PA Housing, Peter Bedford Housing Association, Reading Borough Council, Sutton Housing Partnership, L&Q, Waltham Forest Council, Phoenix Community Housing, Chelmer Housing Partnership, Estuary Housing Association, Folkestone & Hythe District Council, Places for People, Stonewater, West Kent Housing Association, Uttlesford District Council, Peterborough City Council, Croydon Council and Canterbury City Council.
Our main contractor clients include United Living, Mulalley, VINCI, Bell, AD Group, CLC, Axis, Quinn London, Purdy, Sureserve, Aston, Aspect, Sustainable, Chas Berger, PJ Mears and Warmworks.
Tell us about your stock, measures and timescales. Call 0203 411 4885 or email info@ecosystemsgroup.co.uk.
Discuss a programme